Bang & Olufsen BeoLab 4 Guide de l'utilisateur télécharger pdf (Page 10)

10

DAILY USE

Switching on and off

When you have finished setting

up your BeoLab 4000, connect

your entire Bang & Olufsen sys-

tem to the mains.

Turn on the power switch on

each of your BeoLab 4000. The

stand-by indicator (in the

power switch button) lights up

in red, indicating that the

speaker is on stand-by, ready to

be used.

The BeoLab 4000 speakers are

designed to be left in this

stand-by mode when not in use.

When you switch on your audio

system (or video system), the

BeoLab 4000 loudspeakers

switch on simultaneously. The

red stand-by light turns green,

indicating that the speakers are

switched on.

When you switch off your sys-

tem, or mute the sound, the

red light appears immediately,

indicating that the BeoLab 4000

speakers are not in use.

If the BeoLab 4000 speakers are

connected to a non-Bang &

Olufsen system – via the phono

socket (LINE) – they switch on

when a signal is received from

the system. They switch off a

few minutes after the signal

has disappeared.

Maintenance

Clean the surfaces of the Beo-

Lab 4000 using a soft, lint-free

cloth which you have wrung

firmly in a solution of lukewarm

water containing a few drops

of mild household cleaner, for

example a dish washing deter-

gent.

The cooling fins on the rear

may be cleaned using a soft

brush or a vacuum cleaner. The

front cloth may be cleaned with

a vacuum cleaner set to the

lowest level.

Note: Never use alcohol or

other solvents to clean any part

of your BeoLab 4000!

Power switch

and indicator

1 2 ... 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire